What’s new on the B2B Market?

MAYSER PRESENTS HEADLINERS & SOUNDPROOFING SYSTEMS

Mayser will be represented at the Bauma construction machinery trade fair in Munich, Germany, from October 24 to 30, 2022, with products from its foam technology division.  

Bauma is the leading global platform for experts in all aspects of construction and building materials machinery, construction vehicles and equipment. And it is considered the largest trade fair in the world: in 2019, almost 3,700 exhibitors presented themselves to a good 620,000 visitors on more than 614,000 m² of exhibition space. It is clear that Mayser, as a supplier of construction vehicles, cannot be missing here. After all, people who work in construction vehicles are not only regularly exposed to wind and weather. Their daily challenges also include noise and dust. To improve these workplaces, Mayser has developed, among other things, headliners. The self-supporting molded parts based on mixed fiber fleeces made of polyester, glass or natural fibers are characterized, among other things, by their high acoustic efficiency and load-bearing capacity, and they are also easy to install. Combined with a wide range of decorative materials, INDUMONT molded parts offer a broad spectrum of applications that meet technical requirements and design wishes in equal measure.
Other foam products that Mayser will present at Bauma have special properties such as insulating, cushioning and cladding.

The 4th International Exhibition & Conference for Wire & Fair Industry

R+T is the world's leading trade fair for roller shutters, doors and sun protection and gathers the industry from all over the world every three years. From February 21 to 25, you will learn everything about the innovative and flexible pinch protection from Mayser directly from our experts. Whether you have a specific project or would like to obtain general information: We look forward to your visit and will be happy to help you!

Mayser presents the complete sensor profile series for the door and gate market. Mayser solutions not only offer reliable anti-pinch sensors, but are also remarkably easy to handle. In addition, they offer waterproofing with the IP67 standard - thanks to self-assembly without gluing. With just a few simple steps, you get functional safety edges and can secure main and secondary closing edges on any desired gate. Our experts will demonstrate how and explain the areas of application.

Easy-to-clean surfaces, low particle emissions and maximum system availability are key elements for pharmaceutical production, but far from the only ones.
At our next Pharma Impulses event, join us to discuss today's complex mechanical engineering issues for intelligent robotic integration.
On 8 and 9 December 2021, two experts will interact: Christian Kollecker, Director Aseptic Technologies at Harro Höfliger GmbH, and Rudolf M. Weiss, Global Head of Pharma at Stäubli Robotics.
Choose your time slot:
8 December 2021, from 10:00 to 11:00 UTC+2, Online event, Language: English
9 December 2021, from 16:30 to 17:30 UTC+2, Online event, Language: English
Topic:
Combining the expertise of a machine manufacturer and a roboticist for the same purpose.
How robotic solutions help design state-of-the-art pharmaceutical equipment.
Register now!
 
Your Stäubli robotics team

Kongskilde Industries will participate in the : 
Vrac Tech in Macôn from December 7 to 9, 2021

SAMHONG MACHINERY will participate in 2021 World nuclear exhibition

LOZOVA MACHINERY summarizes the results of the agricultural season in Europe. In 2021, we managed to significantly expand the range of supplied products, as well as increase sales to Germany, Poland, Moldova and Lithuania by more than 40%.
 
DUCAT disc harrows with different working widths remain the unchanging sales leader on the European market. This line is in greatest demand in Lithuania, Moldova, Poland and Germany. As local farmers note, Ukrainian-made disc harrows are distinguished by high productivity and high-quality resource-saving processing, in comparison with expensive analogues of other world brands. Particularly impressive is the unmatched advantage – the ZERO SERVICE principle. It is essential for farmers that the equipment should be in operation for as long as possible without additional service, which is what the DUCAT line provides.     
 
Compared to 2020, the Company has expanded its product range to Europe. This year, the sales of the LIRA spring harrow with working widths of 15 and 24 m have started in the EU countries. The legendary LIRA harrow, which has been in demand for almost two decades, met with restrictions on deliveries to Europe due to the standard transport dimensions for our country (4 m). However, after modernization, the transport width of LIRA, which equals 3 meters, fully complies with European standards.
 
In addition to France and the Balkan countries, Polish farmers also discovered and successfully tested DINAR rotary harrows on their fields, which cultivate the soil in high germination without damaging them. The results of the year show that the equipment has successfully entered the market, with further successful implementation of the line predicted.
 
Additionally, based on the findings of a marketing research, the demand for the LARI trail harrow is predicted among European farmers who are already interested in the line. Therefore, the Company is actively promoting harrows to help farmers start the new spring season on time. Machines are the first to appear in the field in any weather, and even sticky wet soil is not an obstacle for them, since farm equipment easily copes with it. 16 rows of diamond-shaped teeth are recognized among the most wear-resistant and reliable on the market (which is confirmed by independent experts).
 
Next year, the Company plans to operate effectively on further development of such markets as Romanian, Hungarian and French (of course, while maintaining the pace of development in other countries).
 
At the beginning of the year, LOZOVA MACHINERY is taking part in AGRITECHNICA-2022, the largest and most anticipated agroindustrial event. The company is preparing a vivid exposition that will demonstrate the growth and development of the Ukrainian agricultural machinery industry.
 
It is worth reminding that in 2021, LOZOVA MACHINERY has released a number of top new products and carried out extensive modernization of the existing lines. In the next season, a significant increase in the presence of equipment – more than double – is expected on the European market.            

The requirements for the operation of power plants at ambient temperatures of over 70 °C or at an altitude of 2,000 m are different from those for standard plants due to the climatic conditions. However, desert regions or mountain ranges in the Alpine belt offer large areas and optimum solar radiation, which are ideal for the efficient operation of photovoltaic plants. It turns out that the original Stäubli MC4 connector range has proven itself in such applications.

The worldwide growth of photovoltaic (PV) systems is opening up new areas of application with complex environmental conditions. About 35% of the continents surface area is by definition desert: generally unpopulated and economically unviable, these areas offer efficient application possibilities, for example for the installation of solar PV plants in the hot, arid deserts of South America, Africa, southern Europe or the Middle East.
Similarly, high-altitude areas are also suitable for solar power generation. Due to the high altitude, PV plants there produce about 50% more energy than in the lowlands. The very high solar radiation and rarely cloudy skies create the ideal conditions for high electricity yields. The high mountain regions in Europe are suitable for this type of installation, but also the Andes mountain range in South America, where more and more PV power plants are being built at altitudes of over 2,000 m. 

Safety standards at high temperatures
As a result of this market development, the Technical Committee TC82 of the International Electrotechnical Commission (IEC) will further differentiate the requirements for installations in different ambient temperature ranges and draft the new edition of the safety standard for PV modules, IEC 61730-1, for applications at an operating temperature of up to 70 °C (98th percentile [1]). For applications at higher ambient temperatures, such as installations in desert regions, the requirements of IEC TS 63126 will apply.
IEC TS 63126 describes not only the thermal requirements for PV modules, but also for added components such as PV junction boxes or PV connectors, for two temperature levels. The following two categories apply to modules:
Temperature level 1: greater than or equal to 80 °C (T98e[2])
Temperature level 2: greater than or equal to 90 °C (T98e).
In this technical specification, paragraph 6.3 describes the requirements for PV connectors according to IEC 62852 for use at the above temperature level. According to this document, the upper limit temperatures (ULT) of the connectors must have a minimum value :
ULT for connectors to be installed
ULT for connectors to be installed in level 1 PV modules: at least 95 °C
ULT for connectors to be installed
ULT for connectors to be installed in Tier 2 PV modules: at least 105 °C
Safety requirements at high altitude
The requirements for insulation co-ordination in electrical product safety standards are usually defined for operating altitudes up to 2000 m [3][TA1] . For applications at higher altitudes, the requirements must be corrected for insulation distances, since at these altitudes the lower atmospheric pressure reduces the resistance of electrical installations against insulation distance breakdown. Therefore, the minimum insulation distance must be multiplied by a correction factor given in Table A.2 of IEC 60664-1:2020 or checked with a higher surge voltage.
Stäubli, a pioneer: the first PV connectors for high temperatures and altitudes

Stäubli Electrical Connectors has enhanced its CombiTac DIN IP65 aluminium enclosure range in sizes 2, 3 and 4 with a new space-saving locking mechanism. This allows users to position a larger number of enclosures side-by-side to save considerable space, particularly in test applications with a large number of test points.

The new enclosures offer a modern, high quality, ergonomic design with a side and top cable entry making operation and handling much more comfortable and user friendly.

Suitable for applications with up to 10,000 plug-in cycles, combined with a full range of CombiTac modules, the CombiTac enclosure solutions ensure a longer service life as well as faster and more economical maintenance.
Other features include shock and vibration resistance (EN 61373 category 1B), IP2X protection during the connection/disconnection process and an operating temperature range of -40 °C to +125 °C.

Customers can quickly configure their CombiTac together with their enclosure using the unique and award-winning CombiTac configurator available on the Stäubli website. Modules can be selected from a wide range of connection types, including power, high voltage, signal, data, coax, thermocouple, fibre optic, fluid and pneumatic, as well as a full range of accessories to meet your exact requirements.

We invite you to an online event to launch a major update of Stäubli Robotics Suite, our powerful software suite for developing and maintaining robotics applications.
During this event, our speakers will present in detail the many new and improved features that make Stäubli Robotics Suite even more ergonomic, faster to implement and easier to use. It also offers a more realistic graphic quality thanks to a brand new 3D engine.  
 
Take advantage of the new and improved features of Stäubli Robotics Suite 2022 to make your intelligent production application a reality today:
A software suite that adds value at every stage of use: design, simulation, installation, production and improvement.
Upgrade and pricing information (stay until the end for a special offer!)
Question and answer session with our specialists
 
Register now
 
We look forward to welcoming you.
Your Stäubli Robotics team

FlexDrum Series Unloaders have been designed to work with any type of adhesive delivered in 200-liter drums, achieving melting rates that exceed other industry standards by up to 30%. The system can be fitted with finned or flat platens to better adapt to the melting rate needs, improving melting capacity.
 
FlexDrum’s new drum fastening system facilitates drum changes for the operators, ensuring the new drum will always be accurately placed in the correct working position. To avoid production downtime, the unloader can work in tandem by simply connecting the two unloaders with an Ethernet cable. No additional equipment or accessories are needed.
 
Accessible from an intuitive touchscreen panel, the integrated grammage control guarantees a precise and uniform application. As for connectivity with the main machine, Flex Drum features Modbus TCP and Ethernet communication protocols.

We continue our column of advice on setting up tillage units from the head of the service department, Oleksandr Shepel.

Both in summer and in autumn, one of the most relevant implements for a farmer is LOZOVA MACHINERY subsoiler, which break down the plough sole at a depth of 45 cm, while keeping the topography of the field. Deep loosening improves the structure of the soil, contributes to the best aeration of the soil and its saturation with moisture. This, in turn, leads to the accumulation and preservation of more water in the soil and creates the prerequisites for the development of microorganisms and bacteria necessary for the growth of the cultivated plants. The company's range of subsoilers is represented by FRANC and GULDEN units.

Today, we will talk about the rules for adjusting the unit for continuous tillage using subsoiling technology: the GULDEN subsoiler with a working width of 4 m.  “For your information, loosening with this implement is carried out, at the choice of the farmer, in one or two levels of the ploughed layer with varying degrees of soil pulverization. This effect is achieved by a combination of two types of working bodies on the unit - subsoiler tines in front and tines with plough shares behind them. The delta-shaped frame of the unit is able to withstand heavy loads caused by the resistance of the soil when working on two levels,” says Oleksandr.

There are four types of required implement adjustments:

• adjustment of the horizontal position of the subsoiler frame;
• depth of tillage;
• position of the plough shares;
• position of the rollers relative to each other.

The horizontal position of the frame guarantees a uniform tillage depth across the working width of the unit. This position of the frame and the specified depth of soil cultivation are achieved by mutual adjustment of the position of the tractor's hydraulic linkage and the position of the levelling rollers. The rollers serve as a support for the rear of the unit during its operation and limit the depth of the working bodies.

“The plough shares, installed after the chisels, allow additional loosening of the soil in the upper soil layer and achieve a finer fraction of clods on the surface. This reduces the rate of evaporation of moisture reserves and optimizes the soil texture of the topsoil,” adds the expert.

Both the position of the rollers and the working depth with the plough shares are adjusted discretely mechanically by the mutual position of the spacers: the lower one (perforated) and lower one (with a stop) using the locking axes.

Oleksandr also warns that when working on soils with high moisture content, as well as with a large content of crop residues on the surface, in order to prevent "shovelling", it is not recommended to use plough shares. In such cases, they are exposed to the extreme upper position and become passive.

The relative position of the rollers is adjusted with struts. With an increase in the length of the strut, the rear roller falls below the front roller, and vice versa.

“We recommend adjusting the relative position of the rollers so that the rear roller axis is 20-25 mm below the front roller axis. This will reduce the chance of soil clogging up between the rollers. At the end of the adjustment, it is necessary to fix the position of the strut screws with the tie bolts,” advised Oleksandr Shepel.

The use of deep loosening in the technology of growing agricultural crops allows you to quickly restore soil fertility and achieve the highest yields. And GULDEN is one of the best equipment for this.

To be continued…

From 23 to 25 November 2021
We will exhibit at: MECSPE 2021 - BOLOGNA (BolognaFiere) - ITALY
Hall 30 Stand C48

We will be present at the MECSPE fair in Bologna from 23/11 to 25/11 with our exhibition stand where we will introduce you to all the services that our company offers!
Come and visit us!
Hall 16 - stand D74

A common requirement for packaging equipment lines is the need for frequent access to adjust, correct, re-set or reprogramme. This a situation where the ingenious Elesa CFSW combined hinge and electrical cut-off switch provides a safe and simple solution.
 
Packaging lines are constantly developing to ensure cost-effective manufacture, often needing to incorporate new machines and especially to achieve low maintenance costs. The Elesa CFSW hinge-cut-off series helps simplify these machine guarding systems by eliminating the need for separate brackets and switches, and has delivered a significant cost saving in both components and fitting times.
 
Packaging machine manufacturers are especially conscious of waste, recycling and use of resources in their FMCG packaging marketplace where they are constantly seeking to minimize use of packaging materials such as cardboard and plastic wrap for their transit packs. CFSW safety switch hinges support that process.
 
Many packaging machines are often used in areas associated with regular wash-down cycles so the CFSW is highly suitable, offering IP67 dust and water protection.
 
The CFSW is double insulated and approved by IMQ CA02.04800 in compliance with EN 60947-1/2007 + EN 60947-5-1:2004 + A1/2009. Low voltage control auxiliaries. Approved by UL: E360222.l. It is available with different combinations of contacts with positive opening (2NO+2NC, 1NO+3NC etc.), and with different output positions of 8 pole male connectors or cables.
 
These robust units are tested to a B10d value of 2,000,000, are totally tamper-proof, and may be quickly and easily installed. The CFSW integrated cut-off hinge provides a simple, reliable and elegant solution to this personnel or equipment safety issue.
 

maxon presents a new frameless BLDC motor with matching encoder that really comes into its own in dynamic applications. At the same time, we are also presenting a new series of ECX flat motors for a wide range of robotics applications. This heralds the arrival on the market of several solutions for design engineers grappling with tight spaces.
Innovative motor concepts are the answer to growing market requirements for dynamic response, compactness, and power density... read more

The S & S Hinge Company (E-Commerce - www.SandSHinge.com) is a third generation Lean continuous piano hinge manufacturer (Est. 1932).  We manufacture the mid-range gauges (.035, .040, .050, .060, and .070) of continuous piano hinge in steel, stainless, aluminum, bright-annealed stainless, brass pre-plate, and nickel pre-plate.  We can customize our standard continuous piano hinges with Value-Added options including: Cut-to-length, hole punching, forming, swaging, offsetting, staking, and many other Value-Added fabrications and post-finishes.
 
S & S stands for "Savings and Service" - the old-fashioned values on which our founders built the business 89 years ago. Today, that means:  Free new-product development, free engineering assistance and free engineered samples/prototypes, new State-of-the-Art ERP/MRP Lean process management systems, ISO 9001:2015 certification assures 100% defect-free parts, and inventory management programs covering all inventory-flow types (ex: JIT, Kanban, etc.).

From February 27 to March 5, 2022 LOZOVA MACHINERY will take part in the largest event in the agricultural industry, the international exhibition AGRITECHNICA-2022, which will traditionally be held in Hannover (Germany).
 
“We are looking forward to the exhibition in order to present our innovative developments with an added vim and energy. AGRITECHNICA has already become a familiar event for us. Similar to how people are waiting for the New Year, we, the agricultural producers, are waiting for AGRITECHNICA”, said Roman Girshfeld, President of LOZOVA MACHINERY.    
 
LOZOVA MACHINERY is actively preparing to participate in the exhibition in order to demonstrate its versatile and efficient solutions, which makes the farmers’ life more comfortable and richer.
 
Since AGRITECHNICA-2019, LOZOVA MACHINERY have grown a lot: product range has been improved and retrofitted, the sales markets has been expanded, the production of completely new products for the company has been developed and mastered.
 
Let us recall, that AGRITECHNICA was supposed to take place this fall, but due to the third wave of the pandemic in Germany, it was postponed to March 2022.
 
We in LOZOVA MACHINERY are looking forward to the exhibition to show and share our best achievements around the world!   

REV-MED Inc. is a biotechnology company with technology that separates stem cells from blood, bone marrow, and fat in the body, and strives to open a new chapter in effective and safe stem cell treatment with a view to enhancing Korea's technological competitiveness in the global market.

We will participate in MEDICA 2021 (World forum for medicine)
If you're interested in our products, please contact us. 

https://kr.kompass.com/c/rev-med/kr123732/
http://www.rev-med.co.kr
https://www.medica-tradefair.com/

International Trade Show for Plastics, Petrochemicals, Packaging & Rubber Industry.