OUTDOOR SWITCH 1 GANG 2WAY - Product

 Dublin  -  Ireland
OUTDOOR SWITCH 1 GANG 2WAY
  • OUTDOOR SWITCH 1 GANG 2WAY
OUTDOOR SWITCH 1GANG 2WAY IP66 10601

Product Code:EOD1G2W

If there's a Socket or Switch you require, which is not listed. Please get in touch sales@wew.ieor phone +353 1 8350850and you can...

Our recommended products and services

NTS7500-PTP / Precision Timing / PTP Grandmaster Clock

Power-Grade Industrial Grandmaster Clock A Powerful base for NTP and PTP The NTS7500 1U 19’’ Rack-mount Modular NTP Server with additional Grandmaster Clock feature is a high-powered rugged device that offers good precision and reliability. Suitable for almost any environment and complying with the harshest Industrial EMC conditions, ATOP’s device satisfies all ndustry requirements for Industrial-grade networking timing applications. Its modular architecture provides power-input redundancy and up to 16 different outputs for legacy time Protocols – such as IRIG-B, BCD, ST, ST with checksum. Stratum 1 NTP Server: NTS7500 embeds a high precision, multi-system GNSS module that supports GPS, GLONASS, BEIDOU and GALILEO GNSS Systems for redundancy. When disconnected from a GNSS time source, its integrated TCXO Oscillator, ensures time drift (1PPS output) does not exceed 30 ppb matching and exceeding the requirements for Power Substations. NTS7500 supports NTPv1/v2/v3/v4 Server and NTP/SNTP Client. Optional PTP Standard Support: NTS7500 supports Layer-2 and Layer-3 over IPv4 transport; VLAN Tagging; and Multicast, Unicast and Unicast Negotiation in both End-to-End and Peer-to-Peer delay calculation modes. NTS7500 fully supports IEEE C37.238-2017 and IEEE/IEC 61850-9-3 – 2016 Power Profiles. Industrial and Substation Hardware : Designed to satisfy EMC requirements for Substation-Grade equipment, NTS7500 has a minimum EMC Level 4 rating and is designed to function between -40°C and 85°C with passive cooling only, allowing it to avoid the risk of having moving parts breakdown from constant operations. Also, its powerful CPU supports up to 2,000 packets per second, allowing endless applications and a large number of slaves to be supported simultaneously. Redundancy through IEC62439-3 Clause 5 PRP. Proven design: No standardized testing procedure for PTP devices exists. So ATOP tests its products yearly in ISPCS Plugfests to demonstrate their reliability. NTS7500 was successfully tested in Stockholm 2016, Monterey 2017, Geneva 2018 and Portland 2019. More information available on www.ispcs.org. APPLICATION CASE IEEE1588v2 Precision Time Protocol PTP is the only protocol that allows network time synchronization in the nanosecond-range. Current networking protocols nor legacy protocols allow such a timestamp resolution. IEEE1588-2008 (v2) derives from an earlier version issued by IEEE in 2002 that is not backward compatible. Being so exact about timestamp resolution and timekeeping, IEEE1588v2 timestamps are required to be hardware-generated, since no software could keep up with some stringent requirements, no matter the processing power. PTP is a hierarchical protocol, in which Grandmaster Clocks are directly synchronized with reference clocks such as GNSS or Atomic Clocks, with subsequent layers reaching slaves devices. PTP packets are timestamped with a nanosecond resolution. To achieve such accuracy, PTP works best on Local Area Networks without passing through the internet: latencies and paths would introduce variables latencies that couldn’t be accommodated for in the accumulated delay calculations. PTP packets should always travel the same path during each synchronization phase to preserve such high accuracy. PTP is designed to work on Ethernet transport, Layer-2 (Data-link Layer) or Layer-3 IPv4. And there are two methods to calculate link delay: in End-to-End mode, link delay is calculated from the source of the PTP packet until its destination, while in Peer-to-Peer mode, link delay is calculated as between each network node. In addition, PTP is Internet-capable, with IPv4 in unicast and unicast negotiation modes. Application example This network diagram shows the use of ATOP’s NTS7500 in a substation environment. The GMC is usually located in the office building adjacent to the substation. On one side, it is connected to the GNSS Antenna, with the other side being the Substation backbone connection. Every switch connected to the Grandmaster should be able to handle all Precision time Protocols by hardware, in order not to affect the synchronization quality. Packets are delivered downstream through Boundary or Transparent clocks, where they’ll reach PTP slaves – such as substation IEDs. High precision GNSS module Stratum 1 NTP Server, with Optional PTP hardware-support PTP Version supports IEEE61850-9-3 and IEEEC37.238 Power Profiles Holdover <30 ns/second time-drift when disconnected from GNSS IEC62439-3 Clause 5 Parallel Redundancy Protocol (PRP) Industrial fanless design for -40~85°C operation; IEC61850-3 protection Flexible modular configuration; 2 dedicated Output Module slots 2 x 10/100/1000 Mbps RJ45 and 2 x 100/1000 Mbps Combo SFP slots Embedded NTP/SNTP client and NTP server Support for Legacy Protocols: IRIG-B, BJT, BCD, ST, ST with checksum Redundant power input; low-Voltage DC or high-Voltage AC/D

EMG8508 Series / Precision Timing / PTP Transparent Clock

8-Port EN 50155 Certified Railway IP67 waterproof Managed Gigabit PoE Switch ATOP’s EMG8508 IP67-rated Railway-compliant Ethernet switch is the best solution for providing high-speed Gigabit connectivity in track-side or on-board Railway applications. Its rugged, aluminum enclosure can effectively protect the Switch core in any environment. The 8-M12 Connectors Gigabit ports can supply up to 30W of PoE Power (802.3af or 802.3at) to your PoE device providing an overall maximum budget of 240W. This makes EMG8508 the ideal solution for on-board or off-board surveillance by simplifying the wiring where it’s difficult, risky and expensive to introduce new elements. The embedded redundant-power supply input provides a reliable and failure-proof safety mechanism to minimize down-times. EMG8508 comes in either redundant Low-Voltage DC power input (12~57 VDC, 47~57 VDC for PoE models) or in redundant High-Voltage DC power input (50~145 VDC). Each power module, including a Relay-output alarm, uses a S-coding M12 connector that makes EMG8508 ideal and simple for engineers setting up a Fault-Alarm System. To prevent network intrusions, it is necessary to have a good accessing control mechanism that can identify, authenticate and authorize users. EMG8508 supports user account, password policy, and authentication interface managements functions that comply with IEC62443 standard. Its IP67 housing protection, combined with a wide operating temperature of -40 to 75°C and wall mounting capacities make it suitable to most Railway applications in harsh environments or industrial field applications. 8 x 10/100/1000 BASE-T(X) ports, M12 connector Up to 8 x 802.3af or 802.3at compliant PoE ports providing maximum 240W PoE power budget EN50155, EN50121-4, IEC60571 and UL 61010-2-201 certified Redundant power input, DC or High Voltage DC Ruggedized IP67 aluminum enclosure Works from -40°C~75°C 2x Relay outputs, 5-pin M12 A-Coding Profinet Conformance Class B compatible Security features based on IEC62443-4-2

EHG9508 Series / Precision Timing / PTP Transparent Clock

8-Port IEC 61850-3 certified Managed Gigabit switch with 2 SFP slots, IEEE1588v2 End-to-End Transparent clock, DIN-Rail mount The EHG9508 Series is a highly reliable Gigabit Managed Ethernet Switch. Its IEC61850-3 compliance allows it to be core part in the IEC 61850 network in power substations and control centers. The series is also certified by DNL.GL (former KEMA) to meet the IEC61850 applications and to support the transmission of GOOSE messages used for fast communication between IEDs. The IEEE1588 Precision Time Protocol capabilities allow the deployment of EHG9508 Series in networks with stringent time Synchronization requirements. It can act as hw-assisted transparent clock providing nanosecond-accurate correction-field packet-update and as a sw-assisted boundary clock, achieving a µs-level accuracy. The device equips up to 6 x 10/100/1000BASE-T(X) RJ-45 ports and 2 x 1000BASE-X SFP ports. With its high performance, it provides network redundancy self-recovery mechanisms is less than 20ms on full load that enables the user to build a reliable network through a redundant ring topology. ERPS/STP/MSTP/RSTP/MRP (Client) and many other compatible rings are supported. With a Multifunctional web dashboard, its offers intelligent features such as Quality of service (QoS), Virtual LAN (VLAN), IGMP, IGMP Snooping, Port mirroring and security. To prevent network intrusions, it is necessary to have a good accessing control mechanism that can identify, authenticate and authorize users. EHG9508 support user account, password policy, and authentication interface managements functions that comply with IEC62443 standard. The EHG9508 Series is designed to be used in core power utilities. It provides dual redundant power inputs with Reverse Polarity Protection and two sets of relay that allow the user build up a stand-alone fault alarm system. Its wide operating temperature of -40 to 85°C and DIN-Rail mounting capacities make it suitable to be used in remote substations where harsh environment and reliability is an issue. IEC61850-3 Certified, KEMA-KEUR 6 or 8 10/100/1000 BASE-T(X) ports and 2 1000 BASE-X SFP ports IEEE1588v2 Precision Time Protocol support, with nanosecond-accurate Hardware-based E2E Transparent clock and Software Boundary Clock ERPS and Compatible Ring (recovery time < 20ms @ 40 switches), STP/RSTP/MSTP/MRP (Client) for network redundancy Remote management over Web browser, Telnet, Serial console, Utility Security features based on IEC62443-4-2

EH7520 Series / Precision Timing / PTP Transparent Clock

Industrial PoE Managed Switches The EH7520 Series is a highly reliable and fault-tolerant Industrial Managed PoE Ethernet Switch. It equips up to sixteen 10/100BASE-T(X) RJ-45 ports and up to four 10/100/1000BASE-T(X)/FX RJ-45 and SFP ports. With its high performance switching capacity, EH7520 Series provides network redundant self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. With a Multifunctional web dashboard, EH7520 Series offers intelligent features such as Quality of service (QoS), Virtual LAN (VLAN), IGMP, Port mirroring and security. To prevent network intrusions, it is necessary to have a good accessing control mechanism that can identify, authenticate and authorize users. EH7520 supports user account, password policy, and authentication interface managements functions that comply with IEC62443 standard. The EH7520 Series is designed for Industrial rugged applications. It equips a 5-pins terminal block to provide dual redundant power inputs with Reverse Polarity Protection and two sets of relay which allows field engineers to build up a stand-alone fault alarm system. Its IP30 housing protection, wide operating temperature of -20 to 70°C and DIN-Rail mounting capacities are liable to do most industrial filed applications. Being Profinet CC-B v2.33 certified, this switch Series is Automation and IoT ready. Profinet allows wired and wireless combinations for an array of connectivity options, providing a more effective backbone for your automation operations. Up to 16 10/100 BASE-T(X) ports and 4 10/100/1000 BASE-T(X) Combo ports Up to 8 802.3af or 802.3at complaint PoE ports ERPS Ring (recovery time < 20ms @ 40 switches), STP/RSTP/MSTP for network redundancy Remote management over Web browser, Telnet console, serial console, and Windows Utility Profinet CC-B v2.33 certified and GSDML file provided Security features based on IEC62443-4-2

Description of the Product

OUTDOOR SWITCH 1GANG 2WAY IP66 10601 

Product Code: EOD1G2W

If there's a Socket or Switch you require, which is not listed.  Please get in touch  sales@wew.ie or phone  +353 1 8350850 and you can source it for you!
 
Product ready for delivery

Price and payment

From 10.00 EUR
  • Credit card

Characteristics of the Product

  • Type OUTDOOR SWITCH
  • Model 1GANG 2WAY IP66 10601
  • Brand wew-waveform
  • Label EOD1G2W

Ask for information